MA3TNE1700-S2
| Description: | Wall Bushing; Threaded; Rear Mount; 17 Pin; E; 7,5-11mm; IP67 |
| rated voltage | 125 V |
| number of positions (w/o PE) | 17 |
| rated current (40 °C) | 9 A |
| termination | crimp |
| IP-class mated | IP67 |
| Product Availability |
| Packing Unit: | 50 Pieces |
| Min. Order Quantity: | 50 Pieces |
| Price per Piece: | €9.02 |
| Total Price plus VAT: | €451.00 |
Technical Data
| part category | male receptacle |
| locking system | screw coupling |
| minimum cable diameter | 7.5 MM |
| maximum cable diameter | 11 MM |
| assembly of receptacle | single hole rear assembly |
| lower temperature | -25 GC |
| upper temperature | 125 GC |
| IP-class mated | IP67 |
| rated voltage | 125 V |
| rated current (40 °C) | 9 A |
| number of positions (w/o PE) | 17 |
| min. wire gauge | 0.1 |
| max. wire gauge | 0.75 |
| shielding | yes |
| connector coding | mechanical coding |
| part number protection cap | P29687 |
Frequently Asked Questions
The following products are required for a complete parts list:
Cable connector and counterpart of the opposite gender (coupling/device part)
For couplings and 90° cable connectors: Backshell
Depending on the application: Protective cap
Crimp contacts
Hand crimping tool or pneumatic tool
M23 Signal offers a device part version with dip solder contacts, e.g. MA1LKE1700-237F. You can request alternative pole configurations from us at industrial@amphenol.de. Alternatively, our flying leads with platinum plugs allow more flexibility and fault tolerance.
Coding is used for M23 Signal connectors to ensure correct and error-free signal transmission. However, this is only shown as a digit in the part number; there is no mechanical coding. By default, the codes E and P go together, F with S and G with R. A correct combination is e.g. MA5CAE1200-S1 and MA5RAP1201.
If you have special requirements regarding the number of cable outlets or their diameter, we will be happy to check the realization of a special version on the basis of the cable datasheet.
Our motion|grade connectors come with a silver-colored metal housing as standard. Alternatively, we will check the color matching of the various components in the desired color for corresponding order quantities.
Our motion|grade connectors are approved with protection class IP67 and are therefore waterproof. The requirement of 30 minutes at a water depth of 1 m is only a minimum requirement. On request, we can test the tightness for special water depths and dwell times.